Switch Port Mapping Tool Network switch port management tool helps network engineers identify the switch port to which a device is connected and thus eliminates the need of manually tracing the network cables. The tool discovers the devices plugged into each port of a specified switch. The tool is useful for system and network engineers to gain visibility into the IP, MAC, VLAN, status and availability of ports.
Since this is a real-time discovery, the administrators can also view the operational status and speed of each port. Switch Port Management Software Why OpUtils for Switch Port Management? The Switch Port Mapper utility of OpUtils software discovers the devices plugged into each port of a specified switch. The tool is useful for system and network engineers to gain visibility into the IP, MAC, status and availability of ports. Since this is a real-time discovery you can also view the operational status and port speed of each port. The Network Switch Port Management mainly consists of features such as. Switch Port Mapper Features End-to-End Port Mapping The Switch port management tool provides an end-to-end mapping with an option to include mapping of physical ports to switch ports.
The administrator can provide the mapping of the physical ports and switch ports in a CSV file, which can be imported to the Switch Port Mapper results. This does not need any change as long as there is no change in the physical mapping. The network switch port management tool automatically retrieves the VLAN details, Virtual IP Addresses of a device, and detects all the devices connected to a port. The Switch Port Mapper also allows the administrators to add their own columns to store user-defined values.
Columns can be created both at the switch-level and at the Switch Details level. Switch port management software uses a Multi-vendor switch support like CISCO, HP, 3com, Nortel,etc. Switch port mapping displays all the MAC addresses connected to the port like computers, IP phones., etc and has ability to Add Custom Fields on the Fly to Store User-defined Values. Role Based Administration Role based administration in network switch port management software helps administrators to exercise more control by creating users with Administrator or Technician Roles.
While users in Administrator Role will have complete access, users in Technician Role will only have read-only access. Adding Switches Adding switches to the switch port mapping tool of the switch port management software can be either manual or by importing the Switch inputs from a CSV file. The CSV file should contain the Switch Name / IP Address, Switch Community, Router Name / IP Address, and Router Community as comma separated values.
Once the switches are added in the switch port mapper software, they are automatically mapped in the background. Optionally, the administrators can also specify the associated subnets to sweep prior to scanning of a switch.
The switch port management tool will make the switch learn all the MAC addresses of the connected devices, which will be retrieved and shown in the results. Grouping and Scanning Switch port Mapper software allows to create different groups based on the location or building. The Switches can seamlessly be moved within groups anytime in switch port management software. Switches in different groups can be scheduled to run at different times.
Whenever a switch is mapped, the results are automatically published as a CSV file that can directly be opened in Microsoft Excel. In the Switch port management software, the history can also be viewed from the OpUtils user interface. This helps administrators to get the details of the devices that are connected to a port in the given period and vice versa. It maps the details stored in the database and provides the mapping history.
Switch port mapping also maps multiple switches simultaneously and schedule the scanning of switches such that switches in different groups can be scheduled separately. Switch Port History and Audit When it comes to managing the switch ports, auditing is utmost important to know who did what and when. Switch Port Mapper logs all the events performed using the tool with the name of the OpUtils User and the date and time of the event. This helps administrators to track and audit the changes made using Switch Port Mapper. The administrators will also be able to track the device that was previously connected to a switch port from the previous scan results that are saved in the history. Switch port mapping tool audits and tracks the changes made to the Switch Port Mapper tool. It views the previous scan results from history. Powerful Search The Switch Port Mapper software can map multiple switches simultaneously.
The administrators in switch port management tool can add all the switches in their network and map them all at once. This gives a complete port status of each of the switches.
To locate where a specific device is connected, the administrators can simply search using the MAC, IP Address, DNS Name, or the Location of the device. Alert Notifications The Switch Port Mapper software provides an option to notify the administrators about the change in state of a switch port by email. Switch Port Mapper software generates alerts when:.
The state changes from Transient to Available. The state changes from Available to Used. The device connected to a port has changed. Notifies when users move on the network Reports OpUtils, based on the Switch Port Mapper software results, provides the Port Availability Report of the network.
Switch port mapper software maintains a policy to declare non-responding ports as available ports. Ports that are not active beyond 10 days are shown as available ports. This can also be configured to a desired value. The Port Availability Reports of OpUtils include: Available Ports, Used Ports, and Stacked Ports. It auto-publish the results to a CSV/ XLS. In addition to the Port Availability Reports, it also provides various reports on port usage, speed and type:.
Switches by Usage. Switches by Task Name. Switches by Vendor. Switch Ports by ifSpeed. Switch Port by ifType. Device with Virtual IP Switch Port Management In addition to mapping switch ports to devices, OpUtils allows administrators to block or unblock a switch port from within this tool. A switch port can be made administratively up or down through SNMP using the SNMP write community string of a switch.
Patching Uplink For Macbook
This is very useful to block the unwanted traffic from a particular port due to a virus attack or hacking. Network Tools In most cases, administrators might also want to get the current status of the switches. From the port details view, they can perform the following actions:. Ping - To send an ICMP packet to the switch to check its availability. SNMP Ping - To check whether the switch responds to SNMP for the given community string. Resolve DNS - To resolve the DNS name of the switch. Resolve MAC Address - To get the MAC address of the switch.
Trace Route - To get the network path of the switch. System Explorer - To get the complete details like the snapshot, CPU, Disk Space Memory details, etc., of the switch Supported Switch Types The Switch Port Mapper tool is tested to support switches of the following vendors: Cisco Nortel HP Foundry Extreme Networks Intel DLink Huawei 3com Allied Telesyn Alcatel Force 10 Dell Free Switch Port Mapper The Switch Port Mapper tool can be used to map a single switch in the OpUtils Free edition. For more details on tools available in Free edition, refer to. For more details, refer to the topic in the online help. Refer to the for troubleshooting tips.
Ambrosia Software appear to be responsible for the mac version of Uplink, but I bought a Uplink as a CD for PC/Mac/Linux, as far as I can tell not from Ambrosia (when I launch the game it shows the logo of 'Contraband Entertainment' however the game does not feature on their website). Since I bought it soon after its release I have only the earliest version of Uplink and I'd like to update it to the most recent version. Unfortunately I can't download the latest version from Ambrosia Software because when I do it tells me it's only a trial version and asks me to register, which means paying for a shareware code which I'm not going to do since I've already payed for the game once. So how do I update Uplink? There's no Mac patch on the files page of Introversion's website. Has anyone else had the same problem?
Why is that rediculous? You paid for the version of Uplink that you got. It still runs, does it not? Neither IV nor Ambrosia are under any obligation to even release new patches, let alone release new patches for the version of the game that you bought, especially considering that you did not buy the game from either IV nor ASW. It would be like me buying a car from a particular dealership, and demanding free oil changes from another dealership because they happen to sell a more recent model of the same make of car. If you want the most recent version, then you will need to buy either the Mac version from ASW, or the Windows/Linux version from IV. EDIT: It would appear that you did not read the, or that you did not notice the link on that page.
You could also try emailing or, which would seem like pretty standard, intuitive ways of getting attention. OK, it's not ridiculous, I said that because I was annoyed.
But I still find it unfair that people who bought the game from Ambrosia have access to these updates and I do not simply because I bought it from a different publisher. (Also your car analogy doesn't really apply here because most other software producers offer patches to their software for free, it is only version updates, i.e.
1.0 to 2.0 that they usually make people pay for). I had indeed visited the page you linked me to (they are both links to the same page btw).
I see no mention of an email address on that page. You argue like a lawyer.
Did Introversion hire you to reply to people like me? The first version of Uplink that I know of for the Mac was 1.3.x. For many years, that was the one and only version. Recently, Ambrosia set about to create a new patch. This patch included not only many bugfixes, but several new features, as well as compatibility with Intel chips. The jump from 1.3.x to 1.6.x (the most recent version for Mac) was equivalent to a version change from 1.0 to 2.0.
The version number was not incremented along those lines, I assume, in order to keep the versioning consistant with IV's version numbers. I would also point out that ASW have updated many of their games to be compatible with Intel chips, and that the newer versions are often sold as independent producs (i.e. Thus, those of us that actually bought Uplink from ASW in the first place could just as easily feel relief that ASW are not charging us again to get the Intel-compatible version. As to the two links going to the same place, one of them should go to an overview of IV's support, while the other should go to a webform that allows you to submit questions. If this is not happening, another link to that form is about half-way down the Support page, in a linked called 'Contact Us'.
As to the email addresses, sales@ and support@ are pretty much industry standard. One or the other (or both) will work with almost any small tech company.